Server rack in the cabinet depth, height, bearing and so on are required. Height of 2.0 meters, 1.8 meters, 1.6 meters in three heights; width of 800mm, 700mm or 600mm three; a depth of 700mm, 800mm and 900mm of three.
Can be configured: Private fixed tray, special sliding tray, power supply support, to casters, feet nails, cable management rings, cable management arm, L brackets, extension beams and so on. The main frame, front and back doors, left and right side door can quickly assemble and disassemble.
Fixed tray: for the installation of equipment, size, variety, versatility, there are 19 “standard tray, non-standard fixed tray. General configuration of the fixed tray depth of 440mm, 480mm, 580mm, 620mm and other specifications. Pallet load-bearing is not fixed less than 50KG.
Sliding tray: to install the keyboard and other equipment, can be easily pulled out and pushed back; 19 “sliding tray for any 19″ standard cabinet. General configuration of the sliding tray depth of 400mm, 480mm two specifications. Load-bearing sliding tray is not less than 20KG.
Power Distribution Unit: Power outlet, suitable for any standard power plug, with 19 “mounting bracket, flexible installation. Size: 6 jacks. Parameters: ~ 220V, 10Amp.
Cable Management Arm: 19 “standard cable management arm. TOPER series can be used with any kind of enclosure to use. 12 cable management hole with 12, 24, 48-port patch panel with the best results.
Cable management rings: dedicated to TOPER 1800 series and TOPER Server series cabinets use of cable management system, installation and removal is very easy to use and the number and position can be adjusted.
L bracket: L bracket for use with the cabinet, the cabinet for installation in 19 “standard equipment, especially heavy weight of the 19″ standard equipment, such as rack-mounted servers and so on.
Blind: Blind to block the 19 “standard rack location within the free use of a 1U, 2U …… and other specifications. Conventional blind as 1U, 2U two.
Extension beams: dedicated to TOPER 1800 series and TOPER Server series cabinets use of the device, the installation of the cabinet to extend the use of space. Installation and removal is very convenient. Also be in line with cable management, power distribution unit installation. Flexible form.
Install nut (nut side): For any a TOPER series cabinets, all the equipment for the cabinet installation, including most parts of the installation of the cabinet.
Keyboard tray: to install a standard computer keyboard, and with the market all the specifications of the computer keyboard; be folding 90 degrees. Keyboard tray with sliding tray must be used.
Fan speed control unit: installed on the top of the cabinet, according to the ambient temperature and equipment temperature control fan speed, effectively reduces the room noise.
Speed: manual, stepless speed regulation.
Rack Fan unit: height of 1U, can be installed in 19 “any height within the cabinet position, as appropriate, according to heat the cabinet configuration.
Full mesh front door: All the cabinet front door? 3 hole, improved thermal performance of the cabinet and shielding performance.
With height: 2.0 meters cabinets, cabinet 1.8 m, 1.6 m enclosure.
Network server rack cabinet cover is used to combine the installation panel, plug, plug boxes, electronic components, devices and mechanical parts and components, to form a whole installation box. Network cabling cabinet is mainly used in engineering, storage router, switch the display with wire rack, and so things are more used in engineering. In general: network cabinet depth is less than equal to 800mm, while the server is greater than or equal depth cabinet 800mm. Network Cabinet should be easy for the production, assembly, testing and packaging of transport. Server cabinets shall comply with the standardized, normalized and serialization requirements. Cabinet handsome in appearance, application, color coordination.